Assignment Information 10/1

Assignment due Wednesday's lab 10/2:
   -Roof
   -2nd Floor

Sheets due:
   -2nd Floor Plan
   -Roof Plan - add slope annotation
   -Building section (Longitudinal)
   -3D view

11"x17" sheets printed and stapled
______________________________________________________________________________

Additional Information for previously graded assignments:

  Grids and Levels
1-Grids placed correctly (7x3 and correct spacing)
2-Levels placed correctly (everyone's are different, add as needed)
3-Markers correct (Both sides, Grid/Level Bubbles)
4-Markers labeled correctly (1,2,3..A,B,C)
5-Correct title block - check your email for the attachment sent earlier this semester
6-Correct information in title block
   -Client Name: Your Name
   -Project Name:VCU Housing
   -Project #:3352
   -Address: listed on sheet
   -Issue Date: day its due: 10/2/13 for this Wednesday
7-Layout I - check for marks - Common issues:
   -Within boundaries
   -Elevation markers not scattered or in wrong place
   -Level markers not overlapping
   -Drawings numbered correct on sheet, place them top right to left then below so numbers correct.
8-Views labeled correctly - if a view is on a sheet it will be numbered with sheet number and drawing number

  Floor Slab, Ext. Walls, Joists, and Beams
9-3 sheets - Plan, Elevation, 3D
10-Floor Slab drawn correctly
11-Walls - correct walls used, double for interior structural walls
12-Joists - joists drawn and correct component used, fine detail level used to show them
13-Beams - Drawn and correct component used, roof angles correct (Sheets useful listed below)
14-Layout II - Check for marks, common issues similar to Layout I, check scale on drawings.

  Interior Walls, Doors, Windows, Thickened Slab/Footings, and Dimensions
15-All Views - 1st, 2nd and Foundation Plans; Elevations, Sections and 3D view
16-Interior Walls - Drawn according to plans and joined, not separated segments
17-Doors- Drawn according to plans, check the way doors swing
18-Windows- Elevations in drawings provide window placement
19-Thickened Slab/Footings - Interior footings drawn and correct, check building sections and foundation plan in drawings. Dashed lines where beneath slab.
20-Dimensions - Plans dimensioned, future assignments will require more dimensions
21-Layout III - Same as previous Layouts, check placement and scale on drawings before bringing them onto a sheet.

List of sheets for reference:
A102 - pg 9   - Floor Plans
A202 - pg 12 - Elevations
A302 - pg 15 - Building Sections
A312 - pg 17 - Wall Sections
A402 - pg 23 - Roof Plan
S201 - pg 29 - Foundation Plan and 2nd Floor Framing Plan
S202 - pg 30 - Roof Framing Plan
S401 - pg 32 - Foundation/Footing Details

Let me know if you have any specific questions,
Cooper Schilder